First, the loose threads have to be cut with sharp scissors. Then it must be washed with fresh water to remove salt and dirt. Then after it has well dried, neoprene glue is used to bond it again. (Use SOFT neoprene glue, that stays soft after curing, such as Black Magic) 1- Make sure the surface is washed with fresh water and that all dirt and sand is removed. Then let the suit completely dry. 8- Refer to our Yazbeck How to Repair your Wetsuit Tears Video – Click Here to View Now 1- Make sure the surface is completely dry
2- Apply Yazbeck Neoprene Repair Glue on each broken edge and cover completely.
3- Keep both sides of the cut separated and wait until dry to touch (about 10 minutes or so, depending on weather and humidity in the air).
4- Apply a 2nd coat on each edge of the cut.
5- Wait again until dry to the touch, then CAREFULLY and PRECISELY join the edges.
6- Once edges are joined, press and pinch forcefully in order to squeeze out any tiny air bubble that may still be trapped between the 2 edges.
7- Once it has been glued, 2 things can be done:
2- Apply the Yazbeck Neoprene Repair Glue on each broken edge and cover completely. Keep both sides separated, do not connect them yet.
3- Wait until dry to touch (about 10 minutes or so, depending on weather and humidity in the air)
4- When both sides feel dry when touched, CAREFULLY and PRECISELY join the edges. Press and pinch forcefully in order to squeeze out any tiny air bubble that may still be trapped between the 2 edges.
5- Refer to our Yazbeck How to Repair your Wetsuit Tears VIDEO – Click Here to View
Category:
How to...?
Category:
How to...?